OEM Ford Spoilers

How to Install a No-Drill (Adhesive) Spoiler on Your Ford in 6 Easy Steps

A spoiler can get your Ford vehicle the attention it deserves and improve its aerodynamics a little at the same time. Whether you drive, say, a car like Ford Focus or otherwise, installing a spoiler's a pretty quick and easy job. Here's how to do it, using trunk mounting as an example.

Note: don't do the job when it's cold out; temps in the 70s Fahrenheit are ideal.

1. Gather What You'll Need

That includes:

2. Clean the Trunk Lid

Wash the top of the trunk with soap and water, and dry it. Then, use the alcohol or paint prep to remove any remaining grease, wax, or other residue on the lid.

3. Apply the Spoiler Tape

This means the manufacturer's tape, not the masking tape. Directions from Ford should tell you whether and how you need to do that. Most importantly, leave the layer protecting the sticky part on, and put any silicone adhesive on that OEM instructions tell you to.

4. Position the Spoiler

Put the spoiler in place on the trunk. Use the tape measure to make sure both sides of it are even, and use the masking tape as a guide for where it'll go. Don't tape it down, though; this is only to remind you where the spoiler is going.

5. Peel Back the Spoiler Tape

Pull about an inch of each piece away. Put the spoiler back on the trunk where the masking tape guide is. Pull away the rest of the spoiler tape without moving the spoiler itself.

6. Install the Spoiler

Once all the tape's off, put firm and even pressure on the spoiler, making sure it's flush with the trunk. Take the masking tape guides off and let the adhesive set for 12 hours or so. In the meantime, don't wash, wax, or drive your vehicle.

The steps here can vary; check your owner's documentation for specifics. Of course, if you're not sure how to go about this, an authorized Ford service center can help.

Shop OEM Spoilers for Ford from Kent WA

They're top-quality, and you can take advantage of steep discounts; order today. We'll ship anywhere stateside, and fast. Contact us if you have any questions.